Landscape · Zero Penetration

Standing Seam Solar Mounting Clamps

Clamp-based system that grips the standing seam profile without any drilling. Four clamp variants cover every seam geometry used in India.

Request a Quote Download Catalogue

Standing Seam 55mm

Standing Seam System variants

T1 Profile · 55 mm Seam

Standing Seam 55mm

The standard 55 mm seam clamp — covers the most common standing seam profile in India.

Standing Seam 55mm is designed for the most widely installed standing seam roofing profile in India. Grub screws fix the aluminium clamp onto the 55 mm seam without drilling, preserving the roof membrane and warranty. Landscape-orientation panels attach via U-clamp or mid-clamp directly to the clamp's T-slot.

Zero roof penetration — preserves manufacturer warranty
Grub-screw clamping, no drilling required
Designed for 55 mm standing seam geometry
Fastest installation in the SunMount range
Landscape panel orientation
Compatible with all PV module brands

Applications: Standing seam factory · Premium commercial · Architectural warehouse · High-end residential

Standing Seam 55mm specifications
Seam Profile	T1
Seam Height	55 mm
Clamp Material	Aluminium 6063 T6 · SS 304
Panel Thickness	30 mm · 35 mm · 40 mm
Design Wind Speed	Up to 200 km/h
Roof Penetration	Zero
Orientation	Landscape
Finish	Anodized / Non-anodized

T2 Profile · 100 mm Seam · Pro

Standing Seam 100mm Pro

Pro-grade 100 mm clamp for tall T2 seam profiles — maximum grip for industrial-grade standing seam roofing.

Standing Seam 100mm Pro accommodates taller, 100 mm T2 standing seam profiles typical of large-span industrial roofing. The deep Pro-grade clamp jaw provides a more secure grip on the wider seam body, and reinforced grub screws ensure lock-tight retention even under extreme wind loads. Panel attachment via T-slot U-clamp or mid-clamp.

Zero roof penetration
Designed for tall 100 mm standing seam geometry
Deeper jaw for positive seam engagement
Grub-screw locking — no drilling
Landscape panel orientation
Compatible with all PV module brands

Applications: Industrial standing seam · Large-span factory · Commercial warehouse · Premium rooftop

Standing Seam 100mm Pro specifications
Seam Profile	T2 · Pro grade
Seam Height	100 mm
Clamp Material	Aluminium 6063 T6 · SS 304
Panel Thickness	30 mm · 35 mm · 40 mm
Design Wind Speed	Up to 200 km/h
Roof Penetration	Zero
Orientation	Landscape
Finish	Anodized / Non-anodized

T2 Profile · 70 mm · Type 1 Clamp

Standing Seam 70mm Type 1

70 mm Type 1 clamp — our patented precision fit for narrow-flange standing seam profiles at 70 mm seam height.

Standing Seam 70mm Type 1 is precision-machined for 70 mm narrow-flange standing seam profiles commonly found on imported and premium domestic roofing systems. The Type 1 clamp jaw conforms to the seam's inner radius, and dual grub screws distribute clamping force evenly without distorting the seam, preserving the roof warranty.

Zero roof penetration
Dual P1–P2 contact for even clamping force
No seam distortion — warranty safe
Patented Type 1 clamp for narrow-flange 70 mm seams
Landscape panel orientation
Compatible with all PV module brands

Applications: Imported standing seam · Premium residential · Architectural project · Commercial rooftop

Standing Seam 70mm Type 1 specifications
Seam Profile	T2 · P1–P2 geometry
Clamp Points	P1 & P2 (dual grub screw)
Clamp Material	Aluminium 6063 T6 · SS 304
Panel Thickness	30 mm · 35 mm · 40 mm
Design Wind Speed	Up to 200 km/h
Roof Penetration	Zero
Orientation	Landscape
Finish	Anodized / Non-anodized

T2 Profile · 70 mm · Type 2 Clamp

Standing Seam 70mm Type 2

70 mm Type 2 clamp — wide-flange geometry for maximum pull-out resistance on large-profile seams.

Standing Seam 70mm Type 2 is engineered for wide-flange 70 mm standing seam profiles. The Type 2 jaw accommodates the wider seam body and dual-point grub screws deliver maximum pull-out resistance for heavy panel loads and high wind environments. This variant provides the highest holding force among the 70 mm seam clamp range.

Zero roof penetration
Dual P2–P3 contact — maximum pull-out resistance
For wide-flange 70 mm seam profiles (Type 2)
High wind-load holding capacity
Landscape panel orientation
Compatible with all PV module brands

Applications: Large-span industrial · Wide-seam standing seam roof · Premium commercial · High wind zone

Standing Seam 70mm Type 2 specifications
Seam Profile	T2 · P2–P3 geometry
Clamp Points	P2 & P3 (dual grub screw)
Clamp Material	Aluminium 6063 T6 · SS 304
Panel Thickness	30 mm · 35 mm · 40 mm
Design Wind Speed	Up to 200 km/h
Roof Penetration	Zero
Orientation	Landscape
Finish	Anodized / Non-anodized

Compare Standing Seam System variants

Standing Seam System variants compared
Specification	Standing Seam 55mm	Standing Seam 100mm Pro	Standing Seam 70mm Type 1	Standing Seam 70mm Type 2
Seam Profile	T1	T2 · Pro grade	T2 · P1–P2 geometry	T2 · P2–P3 geometry
Seam Height	55 mm	100 mm	—	—
Clamp Material	Aluminium 6063 T6 · SS 304	Aluminium 6063 T6 · SS 304	Aluminium 6063 T6 · SS 304	Aluminium 6063 T6 · SS 304
Panel Thickness	30 mm · 35 mm · 40 mm	30 mm · 35 mm · 40 mm	30 mm · 35 mm · 40 mm	30 mm · 35 mm · 40 mm
Design Wind Speed	Up to 200 km/h	Up to 200 km/h	Up to 200 km/h	Up to 200 km/h
Roof Penetration	Zero	Zero	Zero	Zero
Orientation	Landscape	Landscape	Landscape	Landscape
Finish	Anodized / Non-anodized	Anodized / Non-anodized	Anodized / Non-anodized	Anodized / Non-anodized
Clamp Points	—	—	P1 & P2 (dual grub screw)	P2 & P3 (dual grub screw)

Standing Seam System FAQ

Where is the Standing Seam System used?

Typical applications: Standing seam factory, Premium commercial, Architectural warehouse, High-end residential, Industrial standing seam, Large-span factory, Commercial warehouse, Premium rooftop, Imported standing seam, Premium residential, Architectural project, Commercial rooftop, Large-span industrial, Wide-seam standing seam roof, High wind zone.

What wind speed is the Standing Seam System rated for?

Up to 200 km/h design wind speed. Fixing spacing is set from each site's design wind speed.

Which variants of the Standing Seam System are available?

4 variants: Standing Seam 55mm (T1 Profile · 55 mm Seam); Standing Seam 100mm Pro (T2 Profile · 100 mm Seam · Pro); Standing Seam 70mm Type 1 (T2 Profile · 70 mm · Type 1 Clamp); Standing Seam 70mm Type 2 (T2 Profile · 70 mm · Type 2 Clamp).

Which module frame thicknesses does it fit?

30 mm · 35 mm · 40 mm module frames, from any PV module brand.

What is the Standing Seam System made of?

Aluminium 6063 T6 · SS 304.

Related guides

Other SunMount mounting systems

Get a quote for your roof

Share your roof type and project size. Call +91 78379 99222 or send an enquiry.

Send an Enquiry