# Standing Seam Solar Mounting Clamps

> Standing seam solar clamps that grip the seam with zero roof drilling. 55 mm, 70 mm (Type 1 & 2) and 100 mm Pro variants, rated to 200 km/h wind.

Source: https://www.sunmount.in/products/standing-seam  
Manufacturer: Sunmount Solutions Private Limited, Surya Koti, Bajekan-Sirsa Main Road, Sirsa, Haryana 125055, India  
Quote: https://www.sunmount.in/contact · sales@sunmount.in · +91 78379 99222  
Catalogue (PDF): https://www.sunmount.in/catalogue.pdf

Clamp-based system that grips the standing seam profile without any drilling. Four clamp variants cover every seam geometry used in India.

## Standing Seam 55mm

*T1 Profile · 55 mm Seam*

**The standard 55 mm seam clamp — covers the most common standing seam profile in India.**

Standing Seam 55mm is designed for the most widely installed standing seam roofing profile in India. Grub screws fix the aluminium clamp onto the 55 mm seam without drilling, preserving the roof membrane and warranty. Landscape-orientation panels attach via U-clamp or mid-clamp directly to the clamp's T-slot.

### Highlights

- Zero roof penetration — preserves manufacturer warranty
- Grub-screw clamping, no drilling required
- Designed for 55 mm standing seam geometry
- Fastest installation in the SunMount range
- Landscape panel orientation
- Compatible with all PV module brands

**Applications:** Standing seam factory, Premium commercial, Architectural warehouse, High-end residential

### Specifications

| Specification | Value |
| --- | --- |
| Seam Profile | T1 |
| Seam Height | 55 mm |
| Clamp Material | Aluminium 6063 T6 · SS 304 |
| Panel Thickness | 30 mm · 35 mm · 40 mm |
| Design Wind Speed | Up to 200 km/h |
| Roof Penetration | Zero |
| Orientation | Landscape |
| Finish | Anodized / Non-anodized |

## Standing Seam 100mm Pro

*T2 Profile · 100 mm Seam · Pro*

**Pro-grade 100 mm clamp for tall T2 seam profiles — maximum grip for industrial-grade standing seam roofing.**

Standing Seam 100mm Pro accommodates taller, 100 mm T2 standing seam profiles typical of large-span industrial roofing. The deep Pro-grade clamp jaw provides a more secure grip on the wider seam body, and reinforced grub screws ensure lock-tight retention even under extreme wind loads. Panel attachment via T-slot U-clamp or mid-clamp.

### Highlights

- Zero roof penetration
- Designed for tall 100 mm standing seam geometry
- Deeper jaw for positive seam engagement
- Grub-screw locking — no drilling
- Landscape panel orientation
- Compatible with all PV module brands

**Applications:** Industrial standing seam, Large-span factory, Commercial warehouse, Premium rooftop

### Specifications

| Specification | Value |
| --- | --- |
| Seam Profile | T2 · Pro grade |
| Seam Height | 100 mm |
| Clamp Material | Aluminium 6063 T6 · SS 304 |
| Panel Thickness | 30 mm · 35 mm · 40 mm |
| Design Wind Speed | Up to 200 km/h |
| Roof Penetration | Zero |
| Orientation | Landscape |
| Finish | Anodized / Non-anodized |

## Standing Seam 70mm Type 1

*T2 Profile · 70 mm · Type 1 Clamp*

**70 mm Type 1 clamp — our patented precision fit for narrow-flange standing seam profiles at 70 mm seam height.**

Standing Seam 70mm Type 1 is precision-machined for 70 mm narrow-flange standing seam profiles commonly found on imported and premium domestic roofing systems. The Type 1 clamp jaw conforms to the seam's inner radius, and dual grub screws distribute clamping force evenly without distorting the seam, preserving the roof warranty.

### Highlights

- Zero roof penetration
- Dual P1–P2 contact for even clamping force
- No seam distortion — warranty safe
- Patented Type 1 clamp for narrow-flange 70 mm seams
- Landscape panel orientation
- Compatible with all PV module brands

**Applications:** Imported standing seam, Premium residential, Architectural project, Commercial rooftop

### Specifications

| Specification | Value |
| --- | --- |
| Seam Profile | T2 · P1–P2 geometry |
| Clamp Points | P1 & P2 (dual grub screw) |
| Clamp Material | Aluminium 6063 T6 · SS 304 |
| Panel Thickness | 30 mm · 35 mm · 40 mm |
| Design Wind Speed | Up to 200 km/h |
| Roof Penetration | Zero |
| Orientation | Landscape |
| Finish | Anodized / Non-anodized |

## Standing Seam 70mm Type 2

*T2 Profile · 70 mm · Type 2 Clamp*

**70 mm Type 2 clamp — wide-flange geometry for maximum pull-out resistance on large-profile seams.**

Standing Seam 70mm Type 2 is engineered for wide-flange 70 mm standing seam profiles. The Type 2 jaw accommodates the wider seam body and dual-point grub screws deliver maximum pull-out resistance for heavy panel loads and high wind environments. This variant provides the highest holding force among the 70 mm seam clamp range.

### Highlights

- Zero roof penetration
- Dual P2–P3 contact — maximum pull-out resistance
- For wide-flange 70 mm seam profiles (Type 2)
- High wind-load holding capacity
- Landscape panel orientation
- Compatible with all PV module brands

**Applications:** Large-span industrial, Wide-seam standing seam roof, Premium commercial, High wind zone

### Specifications

| Specification | Value |
| --- | --- |
| Seam Profile | T2 · P2–P3 geometry |
| Clamp Points | P2 & P3 (dual grub screw) |
| Clamp Material | Aluminium 6063 T6 · SS 304 |
| Panel Thickness | 30 mm · 35 mm · 40 mm |
| Design Wind Speed | Up to 200 km/h |
| Roof Penetration | Zero |
| Orientation | Landscape |
| Finish | Anodized / Non-anodized |

## Compare Standing Seam System variants

| Specification | Standing Seam 55mm | Standing Seam 100mm Pro | Standing Seam 70mm Type 1 | Standing Seam 70mm Type 2 |
| --- | --- | --- | --- | --- |
| Seam Profile | T1 | T2 · Pro grade | T2 · P1–P2 geometry | T2 · P2–P3 geometry |
| Seam Height | 55 mm | 100 mm | — | — |
| Clamp Material | Aluminium 6063 T6 · SS 304 | Aluminium 6063 T6 · SS 304 | Aluminium 6063 T6 · SS 304 | Aluminium 6063 T6 · SS 304 |
| Panel Thickness | 30 mm · 35 mm · 40 mm | 30 mm · 35 mm · 40 mm | 30 mm · 35 mm · 40 mm | 30 mm · 35 mm · 40 mm |
| Design Wind Speed | Up to 200 km/h | Up to 200 km/h | Up to 200 km/h | Up to 200 km/h |
| Roof Penetration | Zero | Zero | Zero | Zero |
| Orientation | Landscape | Landscape | Landscape | Landscape |
| Finish | Anodized / Non-anodized | Anodized / Non-anodized | Anodized / Non-anodized | Anodized / Non-anodized |
| Clamp Points | — | — | P1 & P2 (dual grub screw) | P2 & P3 (dual grub screw) |

## Standing Seam System FAQ

### Where is the Standing Seam System used?

Typical applications: Standing seam factory, Premium commercial, Architectural warehouse, High-end residential, Industrial standing seam, Large-span factory, Commercial warehouse, Premium rooftop, Imported standing seam, Premium residential, Architectural project, Commercial rooftop, Large-span industrial, Wide-seam standing seam roof, High wind zone.

### What wind speed is the Standing Seam System rated for?

Up to 200 km/h design wind speed. Fixing spacing is set from each site's design wind speed.

### Which variants of the Standing Seam System are available?

4 variants: Standing Seam 55mm (T1 Profile · 55 mm Seam); Standing Seam 100mm Pro (T2 Profile · 100 mm Seam · Pro); Standing Seam 70mm Type 1 (T2 Profile · 70 mm · Type 1 Clamp); Standing Seam 70mm Type 2 (T2 Profile · 70 mm · Type 2 Clamp).

### Which module frame thicknesses does it fit?

30 mm · 35 mm · 40 mm module frames, from any PV module brand.

### What is the Standing Seam System made of?

Aluminium 6063 T6 · SS 304.