# Inclined Solar Mounting Structure (5°–20° Tilt)

> Inclined aluminium solar mounting structure for flat and low-pitch roofs. Adjustable 5°–20° tilt for south-facing panels on metal or asbestos roofs.

Source: https://www.sunmount.in/products/inclined  
Manufacturer: Sunmount Solutions Private Limited, Surya Koti, Bajekan-Sirsa Main Road, Sirsa, Haryana 125055, India  
Quote: https://www.sunmount.in/contact · sales@sunmount.in · +91 78379 99222  
Catalogue (PDF): https://www.sunmount.in/catalogue.pdf

Tilted mounting structure for flat or low-pitch roofs. Adjustable inclination from 5° to 20° for maximum south-facing generation regardless of roof aspect.

## Inclined System

*5° – 20° Adjustable Tilt*

**Adjustable tilt from 5° to 20° — optimises energy yield on north-, east- or west-facing roofs.**

The Inclined System uses precision-extruded L-channel and C-channel aluminium to tilt solar PV panels at an adjustable angle on flat or low-pitch trapezoidal metal and asbestos roofs. Panels face south regardless of roof orientation, maximising annual energy yield. The inclination is set at installation from 5° to 20° depending on site latitude. L-channels attach to the roof crest via self-drilling screws (metal) or J-bolts (asbestos).

### Highlights

- South-facing panels on any roof aspect
- Higher energy yield on flat & low-pitch roofs
- Adjustable tilt 5° – 20° at installation
- Compatible with metal sheet & asbestos cement roofs
- Uses existing J-bolt holes on asbestos roofs
- Portrait orientation — purlin-mounted

**Applications:** Flat industrial roof, Low-pitch residential, North/East/West-facing roof, Asbestos cement roof

### Specifications

| Specification | Value |
| --- | --- |
| C-Channel Height | 50 mm |
| Tilt Angle | 5° – 20° (set at installation) |
| Panel Thickness | 30 mm · 35 mm · 40 mm |
| Material | Aluminium 6063 T6 · SS 304 · EPDM |
| Design Wind Speed | Up to 170 km/h |
| Orientation | Portrait · South-facing |
| Roof Attachment | Self-drilling screws / J-bolts |
| Finish | Anodized / Non-anodized |

## Inclined System FAQ

### Where is the Inclined System used?

Typical applications: Flat industrial roof, Low-pitch residential, North/East/West-facing roof, Asbestos cement roof.

### What wind speed is the Inclined System rated for?

Up to 170 km/h design wind speed. Fixing spacing is set from each site's design wind speed.

### Which module frame thicknesses does it fit?

30 mm · 35 mm · 40 mm module frames, from any PV module brand.

### What is the Inclined System made of?

Aluminium 6063 T6 · SS 304 · EPDM.